2010 Shinoda Performance 3 inch Exhaust
- Cat-back 3” dual kit with performance mufflers
- 2010 Ford Mustang 4.6L GT Kit Includes:
- 1) left over the axle pipe--#1028877
- 1) right over the axle pipe--#1028876
- 1) #1028878 performance muffler right
- 1) #1028879 performance muffler left
- 2) 3” clamps
Instructions: NOTE: DO NOT TIGHTEN ANY BOLTS OR CLAMPS UNTIL THE LAST STEP!!
1) Support the vehiclein a safe manner, using a shop hoist or frame contact jackstands on a level surface.Remove the o.e. mufflers,at the clampswhere the oldmufflers bolt to the over the axlepipes.
2) Install the leftmuffler to the driver side over the axle pipe using a 2-1/2” clamp, line up the notch. Connect the wire hangers on the muffler to the o.e. mounts above.
3)Repeat step 2) for the right (passenger) side.
4) Check for clearance of the frame,body,suspension members,and of all brake and fuel lines. When you are satisfied with how themufflers hang, tightenthe clamps.
Write Your Own Review